INSTALLING SHINGLES FIRST COURSE Start with full shingle, which MUST be nailed on lower nail zone line. Shingle exposure

Project overview

Hartford commercial permit COM-ALT-25-000081 (Commercial Alteration Permit): INSTALLING SHINGLES FIRST COURSE Start with full shingle, which MUST be nailed on lower nail zone line. Shingle exposure should be 5 5/8" (143 mm). SECOND COURSE Position the shingles in the second and subsequent courses flush with the tops of the wide cut-outs. This results in a 5 5/8" (143 mm) exposure. THIRD COURSE  Trim 11" (279 mm) from rake end of first shingle. FOURTH COURSE AND REMAINING Strike a chalk line about every 6 courses to check parallel alignment with eaves. Trim 17" (432 mm) from rake end of first shingle. Continue with whole shingles. Repeat the 1st to 4th course instructions on the remaining courses, starting the fifth course with a full shingle. 168 VID ST, HARTFORD, TC 06112. Hartford commercial permit COM-ALT-25-000283 (Commercial Alteration Permit): INSTALLING SHINGLES FIRST COURSE Start with full shingle, which MUST be nailed on lower nail zone line. Shingle exposure should be 5 5/8" (143 mm). SECOND COURSE Position the shingles in the second and subsequent courses flush with the tops of the wide cut-outs. This results in a 5 5/8" (143 mm) exposure. THIRD COURSE  Trim 11" (279 mm) from rake end of first shingle. FOURTH COURSE AND REMAINING Strike a chalk line about every 6 courses to check parallel alignment with eaves. Trim 17" (432 mm) from rake end of first shingle. Continue with whole shingles. Repeat the 1st to 4th course instructions on the remaining courses, starting the fifth course with a full shingle. 55 COLONIAL ST, HARTFORD, CT 06106. Hartford commercial permit COM-ALT-25-000438 (Commercial Alteration Permit): INSTALLING SHINGLES FIRST COURSE  Start with full shingle, which MUST be nailed on lower nail zone line. Shingle exposure should be 5 5/8" (143 mm). SECOND COURSE Position the shingles in the second and subsequent courses flush with the tops of the wide cut-outs. This results in a 5 5/8" (143 mm) exposure. THIRD COURSE  Trim 11" (279 mm) from rake end of first shingle. FOURTH COURSE AND REMAINING Strike a chalk line about every 6 courses to check parallel alignment with eaves. Trim 17" (432 mm) from rake end of first shingle. Continue with whole shingles. Repeat the 1st to 4th course instructions on the remaining courses, starting the fifth course with a full shingle.. 17 MC KINLEY ST, HARTFORD, CT 06114. Hartford commercial permit COM-ALT-25-000482 (Commercial Alteration Permit): INSTALLING SHINGLES FIRST COURSE Start with full shingle, which MUST be nailed on lower nail zone line. Shingle exposure should be 5 5/8" (143 mm). SECOND COURSE Position the shingles in the second and subsequent courses flush with the tops of the wide cut-outs. This results in a 5 5/8" (143 mm) exposure. THIRD COURSE  Trim 11" (279 mm) from rake end of first shingle. FOURTH COURSE AND REMAINING Strike a chalk line about every 6 courses to check parallel alignment with eaves. Trim 17" (432 mm) from rake end of first shingle. Continue with whole shingles. Repeat the 1st to 4th course instructions on the remaining courses, starting the fifth course with a full shingle.. 459 EDGEWOOD ST, HARTFORD, CT 06112.

Key specs

• Commercial Alteration Permit
• 168 VID ST, HARTFORD, TC 06112
• Permit COM-ALT-25-000081
• 55 COLONIAL ST, HARTFORD, CT 06106
• Permit COM-ALT-25-000283
• 17 MC KINLEY ST, HARTFORD, CT 06114
• Permit COM-ALT-25-000438
• 459 EDGEWOOD ST, HARTFORD, CT 06112
• Permit COM-ALT-25-000482

Manufacturer watch list

• hvac
• roofing
• lighting
• concrete
• fire suppression