SSpecIndex

Hardwiring a ChargePoint home Flex EVSE set to 48 amps and mounted on the exterior wall of the home. installing 3/4" con

🔥 17/100
← All projects
permittingCommercial

Hardwiring a ChargePoint home Flex EVSE set to 48 amps and mounted on the exterior wall of the home. installing 3/4" con

SPX-134738

Hartford, Hartford County, Connecticut

Project ID
SPX-134738
Estimated value
$900
Square footage
Not reported
Opened / announced
Sep 18, 2025
Owner
Not reported
General contractor
Not reported
Architect
Not reported
Brands mentioned
None in public seed

Project overview

Hartford commercial permit MISC-ELC-25-000686 (Electrical Permit): Hardwiring a ChargePoint home Flex EVSE set to 48 amps and mounted on the exterior wall of the home. installing 3/4" conduit and pulling #6 THHN/THWN-2 from the existing 200-amp Main panel to the EVSE. Installing a 60-amp breaker to protect the EVSE. The EVSE has built-in GFCI protection.. 108 KENYON ST, HARTFORD, CT 06105.

Key specs

  • Electrical Permit
  • 108 KENYON ST, HARTFORD, CT 06105
  • Permit MISC-ELC-25-000686

Still open for manufacturers

Active commercial building permit. Early product/spec window.

Manufacturer watch list

  • hvac
  • roofing
  • lighting
  • concrete
  • fire suppression

Timeline

  1. Permit issued

    Sep 18, 2025 · Prior research

Run a brand check for this projectBack to all projects

Priority score

Low signal

17/100

Value
14/40
Recency
3/35
News coverage
0/25
📍 Regional location pending

Hartford, Hartford County, CT

Exact coordinates for this project haven't been geocoded yet.