1501 Enderly Pl

Project overview

Fort Worth commercial permit PB26-04953: Remove existing roof systems. Install new warranty 20 year system. Remove existing (2) roof systems down to the steel deck below Mechanically fasten, per manufacturer’s recommendations, (2) layers of 2.2”- 20 p.s.i. polyisocyanurate insulation equalingR25. Embed ½” per foot tapered crickets in ribbons of LRF adhesive, between primary drainage points & at the backside of HVACcurbs. Embed (1) layer of 5/8” DensDeck, StormX Prime VSH, high-density coverboard in ribbons of low-rise foam adhesive. Embed (1) layer of Sopralene Flam 180 in Coldply EF adhesive. Heat-weld (1) layer of Sopralene Flam 180 FR GR. Heat-weld (1) layer of Sopralene Flam 180 & Sopralene Flam 180 FR GR at flashing conditions. Fabricate and install new 24-guage galvanized steel overflow scuppers with prefinished faceplates to match the existing locations. Fabricate and install new 24-gauge prefinished steel gutters, downspouts & counter flashings. Upon completion, furnish a 20-year, No-Dollar-Limit warranty from the materials manufacturer for the low-slope roof assembly, 20-year finish warranty for pre-finished metal & 2-year standard installers warranty.. 1501 ENDERLY PL.

Key specs

• Remodel
• 1501 ENDERLY PL
• Permit PB26-04953

Manufacturer watch list

• hvac
• roofing
• lighting
• concrete
• fire suppression